by model

all-sun test & measurement equipments >> Metal Detector

Picture of all-sun TS1310
Model: TS1310



This metal detector should be installed on a flat level platform (or ground) of nonmetallic material and its two planks should be vertical and parallel with each other. Its power supply must be well grounded. There must be no moving metallic object near the metal detector. Do not use the metal detector near an interference source (such as wire cutting machine, electric welder, voltage regulating device, and etc).


● Power Supply: AC110V/220V, at 50/60 HZ
● Power Consumption: < 20W
● Zone Number: Seven zones from top to bottom
● Alarm: Sound and LED light
● Sensitivity: 0 - 255 sensitivity degree, 7 independently adjustable zones
● Alarm Volume: 0 - 8 degree, adjustable
● Alarm Tone: 0 - 7 degree, adjustable
● Infrared Counting: Can be enabled or disabled. The counter can be zeroed and the statistical result can be saved.
● Password Protection
● Parameter Setting: Via touch keys


Contact us

E-SUN®  |  all-sun®  

Eastern Technology Group is professional manufacturers of test & measurement instruments in China.
The main products contain Multi-meter, Digital Multimeters, Digital Clamp meter, Metal Detectors, Distance Measures, Infrared Thermometer,
Voltage, Battery Tester, Digital Scale and multifunction sensor all of which have an advantage in domestic and overseas markets.
Car Repair Tool   |   Digital Clamp Meter   |   Digital Multimeter   |  Contact Us  |  Chinese Version
Copyright © Eastern Technology Group. All rights reserved.